Aluminum honeycomb panel
(1). Product introduction
"Chang-Feng" brand aluminum honeycomb panels used to be a very good
Weather resistance surface coating of the decorative coating of
high-strength aluminum alloy as a surface plate with the aluminum
honeycomb core by the high temperature and high pressure composite
made from the composite plates, the core of this product technology
- vacuum complex space with the United States DuPont "Dupont"
ternary, such as polyethylene powder tackifier tackifier to ensure
that the composite strength. Products with a light weight, high
strength, good stiffness, corrosion resistance strong, stable
performance and so on. Because of face, the air layer between the
floor was divided into numerous cellular closed holes, heat and
sound waves spread under severe restrictions, and other wall
decoration materials, aluminum honeycomb board has a good thermal
insulation, thermal insulation properties.
Aluminum honeycomb panel uses previously limited to the aviation
field, in recent years along with economic development, its use
gradually spread to civilian areas, such as decorative building
materials, vehicles, vessels of the wall panels, bulkhead, etc..
(2)Test Report
(3)Product
(4). Size
A. Standard Units:mm
Length:1000－5000
Width:1220-1500
Thickness:6mm-25mm
B. Special specifications requested by customers, the two sides to
discuss identified.
(5). Aluminum honeycomb panel and pure aluminum sheet, plate
strength, weight comparison
| Materials | Thickness H(mm) | Stiffness KN.m2/m | Weight kg/m2 |
| Aluminum honeycomb panel | 6.0(Panel1.0,Backplane0.5) | 0.71 | 4.9 |
| Pure aluminum | 2.5 | 0.115 | 7.1 |
| Plate | 1.7 | 0.115 | 18.7 |
